CO2 Fractional Laser Machine
₨1,850,000
The CO2 Fractional Laser Machine is a professional ablative laser system used for controlled skin resurfacing and a range of aesthetic dermatology procedures. Fractional CO₂ laser technology typically uses a 10,600 nm carbon dioxide laser and delivers energy in a fractional pattern, treating microscopic columns of skin while leaving surrounding tissue untreated. This approach is designed to stimulate controlled skin remodeling while limiting the treated surface area compared with fully ablative resurfacing.
Fractional CO₂ laser systems are commonly used for acne-scar treatment, skin resurfacing, uneven skin texture, fine lines and wrinkles, selected scars, and other skin-renewal procedures. Current clinical evidence supports fractional CO₂ laser as an established option for atrophic acne scars, although treatment intensity, downtime and adverse-effect risk vary by patient and settings.
For aesthetic clinics in Pakistan, the machine can be an important addition to a professional laser platform, particularly where advanced resurfacing and scar-treatment procedures are offered.
- Order now and our team will confirm availability and dispatch details shortly.
Details
What Is a Fractional CO2 Laser?
A fractional CO₂ laser uses carbon dioxide laser energy to create precisely controlled microscopic treatment zones in the skin.
Unlike conventional fully ablative resurfacing, fractional treatment does not necessarily remove the entire surface of the treatment area. Instead, the laser creates microscopic columns or zones of thermal injury separated by untreated skin.
This fractional approach allows the body to begin a wound-healing and remodeling response while untreated surrounding tissue remains available to support recovery.
A systematic review published in 2025 found that fractional CO₂ laser treatment for acne scars was associated with improvements in scar appearance across the reviewed studies, while commonly reported temporary adverse effects included erythema, edema and post-inflammatory hyperpigmentation.
10,600nm CO2 Fractional Laser Technology
Most professional fractional CO₂ laser systems use a wavelength of approximately 10,600 nm.
At this wavelength, laser energy is strongly absorbed by water in biological tissue. The resulting thermal interaction allows the operator to create controlled microscopic treatment zones.
Depending on the machine, the operator may be able to adjust parameters such as:
- Laser power
- Pulse duration
- Energy
- Density
- Spot size
- Scanning area
- Scan pattern
- Treatment mode
- Repeat frequency
- Fractional coverage
The exact specifications vary considerably between manufacturers and models.
For example, current Pakistan-market CO₂ fractional systems include configurations advertised with 10,600 nm wavelength and 30W, 40W or 60W options, while other systems use different tube and scanning configurations.
Therefore, buyers should verify the exact technical specification of the individual machine rather than assuming every CO₂ fractional laser has identical performance.
Main Applications of CO2 Fractional Laser Machine
A professional CO2 Fractional Laser Machine may be used for several aesthetic skin-resurfacing applications.
Acne Scars
Fractional CO₂ laser is widely used for atrophic acne scars, including selected rolling, boxcar and other depressed scar patterns.
Recent evidence continues to support fractional CO₂ laser as an effective scar-resurfacing option. A 2026 meta-analysis comparing fractional CO₂ with erbium-based fractional lasers found a favorable clinical-response signal for CO₂ laser, while also reporting greater procedural pain and longer recovery in the analyzed studies.
Another 2026 meta-analysis comparing fractional CO₂ with needling-based treatments found that both approaches can improve atrophic acne scars, while emphasizing that skin type, scar characteristics and complication risk should be considered when selecting treatment.
Skin Resurfacing
Fractional CO₂ laser can be used for controlled resurfacing to improve the appearance of:
- Uneven skin texture
- Rough skin
- Fine lines
- Wrinkles
- Photodamaged skin
- Selected superficial scars
The depth and intensity of resurfacing depend heavily on the treatment parameters.
Fine Lines and Wrinkles
Controlled fractional resurfacing can stimulate a wound-healing response and remodeling of the treated skin.
This makes fractional CO₂ laser a commonly used technology for facial rejuvenation and improvement in the appearance of fine lines and photoaging.
Surgical and Traumatic Scars
Fractional CO₂ laser has also been investigated for scar management beyond acne scars.
A 2025 systematic review and meta-analysis found evidence supporting fractional CO₂ laser for surgical scar management, although timing and treatment protocols varied across studies.
Skin Texture
Fractional resurfacing can be incorporated into professional protocols designed to improve uneven or irregular skin texture.
CO2 Fractional Laser for Acne Scars
Acne-scar treatment is one of the most commercially relevant applications of a fractional CO₂ system.
The laser creates controlled microscopic thermal columns in the scarred skin. The subsequent healing process can encourage remodeling of collagen and other dermal structures.
However, results depend on:
- Scar type
- Scar depth
- Skin type
- Previous treatments
- Laser parameters
- Treatment density
- Number of sessions
- Post-treatment care
- Individual healing response
It is therefore inappropriate to promise a fixed percentage of improvement to every patient.
A 2026 comparison of fractional CO₂ and microneedling-based modalities found that CO₂ laser showed higher categorical treatment success in the analyzed studies but also a greater risk of post-inflammatory hyperpigmentation compared with standard microneedling.
CO2 Fractional Laser for Skin Resurfacing
One of the major advantages of fractional CO₂ technology is its ability to combine controlled tissue ablation with fractional treatment coverage.
Instead of treating every millimeter of the skin surface, the system can create a pattern of microscopic treatment zones.
The untreated areas between these zones can contribute to the healing process.
This technology is particularly relevant for clinics offering:
Fractional resurfacing + acne-scar treatment + facial rejuvenation + texture improvement
The exact treatment parameters should be selected by a properly trained professional based on the patient’s skin and treatment objective.
Fractional vs Fully Ablative CO2 Laser
The terms fractional and fully ablative should not be treated as interchangeable.
| Feature | Fractional CO₂ | Fully Ablative CO₂ |
|---|---|---|
| Treatment pattern | Fractional/microscopic zones | Broad surface treatment |
| Untreated skin between treatment zones | Yes | Much less |
| Typical recovery | Generally less than full-field ablation | Usually greater |
| Treatment intensity | Adjustable | More extensive |
| Common aesthetic use | Acne scars, resurfacing, texture, wrinkles | More aggressive resurfacing |
| Downtime | Depends on settings | Generally longer |
A fractional system can still produce significant thermal injury and downtime, especially when higher-density or deeper settings are used.
Important Machine Features
When purchasing a CO2 Fractional Laser Machine in Pakistan, technical specifications should be carefully evaluated.
1. 10,600nm Laser Source
Confirm that the machine is actually using the intended CO₂ wavelength and verify the laser source specification.
2. Laser Tube
Machines may use different laser-tube configurations, including glass tubes and RF metal tubes. Current Pakistan-market equipment listings show both configurations.
3. Output Power
CO₂ machines may be available with different power configurations.
Some currently listed Pakistan-market systems advertise 30W, 40W and 60W options.
The advertised wattage should not be considered the only indicator of treatment performance.
4. Scanning System
A good scanner can provide controlled treatment patterns and help practitioners adjust the treated area.
5. Fractional Density
The ability to control treatment density is important because different patients and treatment areas may require different protocols.
6. Pulse Modes
Depending on the machine, available modes may include:
- Continuous wave
- Ultra-pulse
- Super-pulse
- Fractional modes
The exact terminology and implementation vary between manufacturers.
7. Adjustable Parameters
Look for appropriate control over energy, pulse duration, density and scanning parameters.
8. Handpieces
Check exactly which handpieces are included with the machine and whether replacement components are available.
9. Cooling
Adequate machine cooling is important for reliable operation. Confirm the actual cooling system rather than relying on generic advertising terminology.
10. Service & Spare Parts
For a clinic, after-sales support can be as important as the machine itself.
Ask about:
- Warranty
- Laser tube replacement
- Scanner servicing
- Handpiece availability
- Technical support
- Training
- Spare parts
CO2 Fractional Laser Machine for Clinics
A professional CO₂ fractional system can be suitable for:
- Dermatology clinics
- Aesthetic clinics
- Laser clinics
- Medical spas
- Cosmetic treatment centers
- Skin clinics
- Plastic surgery practices
Because CO₂ fractional laser is an ablative technology, it should be operated by appropriately trained professionals who understand laser safety, skin assessment, treatment parameters and post-procedure care.
CO2 Fractional Laser for Different Skin Types
Patient selection and parameter selection are particularly important when treating darker skin tones.
Fractional CO₂ laser can cause temporary or, in some cases, more persistent pigmentary changes.
Post-inflammatory hyperpigmentation is a recognized concern following fractional CO₂ treatment. Recent comparative evidence also found a higher PIH risk for fractional CO₂ than standard microneedling in some acne-scar studies.
For patients with higher Fitzpatrick skin types, appropriate assessment, conservative parameter selection and careful post-treatment management are particularly important.
This is especially relevant for clinics serving the diverse skin types commonly encountered in Pakistan.
CO2 Fractional Laser Treatment Downtime
Downtime varies according to:
- Energy
- Density
- Pulse duration
- Treatment depth
- Treatment area
- Skin type
- Individual healing
- Number of passes
After treatment, patients may experience:
- Redness
- Swelling
- Heat or discomfort
- Crusting
- Peeling
- Temporary sensitivity
A 2026 meta-analysis comparing fractional CO₂ with erbium-based fractional lasers found greater pain and longer downtime associated with CO₂ in the analyzed studies.
Therefore, clinics should provide realistic expectations rather than advertising fractional CO₂ laser as a zero-downtime procedure.
CO2 Fractional Laser Safety
CO₂ fractional laser is a powerful ablative technology and requires proper safety protocols.
Professional clinics should consider:
- Laser safety training
- Appropriate protective eyewear
- Controlled treatment rooms
- Smoke/plume management
- Sterile or hygienic treatment procedures
- Proper patient assessment
- Appropriate treatment parameters
- Post-treatment instructions
- Manufacturer guidelines
Operators should also understand contraindications and potential complications before performing treatment.
Possible adverse effects can include erythema, edema, discomfort, crusting, infection, prolonged pigmentation changes and, depending on treatment intensity and patient factors, scarring.
CO2 Fractional Laser Machine Price in Pakistan
The CO2 Fractional Laser Machine price in Pakistan varies according to the configuration and manufacturer.
Important pricing factors include:
- CO₂ laser tube type
- Laser output
- Scanner technology
- Fractional handpiece
- Pulse modes
- Control system
- Cooling system
- Machine build quality
- Warranty
- Training
- Spare parts
- Local technical support
A lower-priced machine may have a different laser source, scanner, cooling system or service arrangement than a higher-specification professional system.
For this reason, clinics should compare the complete configuration and after-sales support, not simply the advertised price.
How to Choose a CO2 Fractional Laser Machine in Pakistan
Before purchasing, ask the supplier to provide:
- Exact model number
- Laser wavelength
- Laser source/tube type
- Maximum output power
- Pulse modes
- Scanner specifications
- Spot or scan size
- Fractional density range
- Handpieces included
- Cooling system
- Warranty terms
- Training availability
- Spare-parts availability
- Service arrangements
- Regulatory documentation where applicable
A professional supplier should be able to explain what each specification means for the intended clinical application.
Why Add a CO2 Fractional Laser to an Aesthetic Clinic?
A fractional CO₂ platform can expand the range of professional resurfacing procedures available at an aesthetic or dermatology clinic.
A single system may support treatment protocols involving:
Acne scars
Skin resurfacing
Fine lines and wrinkles
Uneven texture
Selected scars
Photoaging
This makes fractional CO₂ technology relevant for clinics that want to offer more advanced laser-based skin-resurfacing procedures.
However, the appropriate machine should be selected according to the clinic’s patient population, operator expertise, intended treatments, service availability and budget.
Frequently Asked Questions
What wavelength does a CO2 fractional laser use?
Professional fractional CO₂ laser systems generally use a wavelength around 10,600 nm. Current Pakistan-market systems also list 10,600 nm configurations.
What is a CO2 fractional laser used for?
It is commonly used for fractional skin resurfacing, acne scars, selected scars, fine lines, wrinkles and uneven skin texture.
Is fractional CO2 laser good for acne scars?
Clinical research supports fractional CO₂ laser as an effective option for atrophic acne scars, although results and risks vary according to scar type, skin type and treatment parameters.
Does fractional CO2 laser have downtime?
Yes. Downtime varies according to treatment intensity and patient factors. Redness, swelling, crusting and peeling can occur.
Is fractional CO2 laser suitable for Pakistani skin?
It can be used in appropriately selected patients, but pigmentation risk needs careful consideration, particularly with darker skin types. Professional assessment and parameter selection are important.
What is the difference between CO2 and Er:YAG fractional lasers?
Both can be used for fractional resurfacing, but they differ in wavelength, tissue interaction and clinical characteristics. Recent comparative evidence indicates differences in pain and recovery depending on the treatment and parameters.
Buy CO2 Fractional Laser Machine in Pakistan
If you are setting up an aesthetic clinic, dermatology clinic or laser center, a professional CO2 Fractional Laser Machine can provide an advanced platform for fractional resurfacing and selected scar and skin-rejuvenation procedures.
For price, availability and professional equipment support, contact:
03005673567
03008558558
Reviews
There are no reviews yet.